Accessories

No winter riding kit is complete without the proper headwear. The AmFIB® Lite Balaclava will help you conquer the cold with technical fabrics and thoughtful cycling features. Polartec® Wind Pro® fabric on the leading edge blocks the wind, while the highly breathable thermal fabric on the top and back keeps you from overheating. The hinged face covering is easy to pull down for eating and drinking, or to dump a little heat while climbing. It fits comfortably under a helmet and a ponytail port in the rear adds to the appeal of this full-featured balaclava. FEATURES: - Pedal to Zero™: Going by bike 5mi / 7km offsets the climate impact of this garment - Polartec® Wind Pro® fabric on the front provides protection where you need it most - Thermal fabric on the top and back ensures the right amount of breathability - Made with recycled materials - Hinged face covering is easy to pull down when needed - Rear port for ponytails FABRIC: - Main Body: 79% recycled polyester, 21% spandex Front Panel: 97% polyester, 3% spandex

Whether you’re preparing to hit the road or trail, the AmFIB® Lite shoe cover is the right choice to keep your feet warm and dry. The three-layer softshell fabric blocks the wind and sheds moisture while remaining highly breathable. A high cuff designed to overlap with tights ensures a comfortable seal, and BioViz® reflective elements on the toe, side, and heel increase low-light visibility. FEATURES: - Compatible with road and mountain bike shoes - Three-layer softshell fabric is windproof and water-resistant - Zippered closure for installation and removal - BioViz® reflective elements increase low-light visibility FABRIC: - 43% polyamide, 29% polyester, 28% polyurethane

Arm warmers are likely the most essential cool weather cycling accessory, and for much of year you won't leave home without them either on or in your pockets. Our latest warmers feature a new, softer Thermal fleece fabric with improved stretch, which makes both fit and comfort exceptional. But our PI Dry technology is what really sets these warmers apart, offering permanent water-shedding performance for more warmth in damp conditions. A BioViz logo near the elbow adds reflectivity in low-light conditions. - Thermal fleece fabric with water-shedding PI Dry technology for all-weather performance - Anatomic left- and right-specific fit - Plush, wide elastic binding with silicone gripper for a stay-up fit - BioViz reflective elements for low-light visibility - Unisex sizing - 56% recycled nylon, 30% polyester, 14% Lycra elastane - Imported

An essential accessory for any level of rider, these leg warmers transform your shorts into much warmer full-length tights. Our latest warmers feature a new, softer Thermal fleece fabric with improved stretch, which makes both fit and comfort exceptional. But, our PI Dry technology is what really sets these warmers apart, offering permanent water-shedding performance for puddle-charging splash resistance and more warmth in wet conditions. A BioViz logo on the back of the calf adds reflectivity in low-light conditions. - Thermal fleece fabric with water-shedding PI Dry technology for all-weather performance - Anatomic construction eliminates bunching through your full range of motion - Plush, wide elastic binding with silicone gripper for a stay-up fit - BioViz reflective elements for low-light visibility - Zippered ankle for easy on-and-off - 56% recycled nylon, 30% polyester, 14% Lycra elastane - Made in Vietnam

Let's get real; toe covers are a great way to deal with cold weather. They can be pulled over the toe of most cycling shoes and left on for the whole winter, and people do more miles on 45-degree days than they do on 25-degree days (even in Canada). Our toe cover uses our AmFIB softshell fabric to keep out the wind and rain and we positioned the band to sit behind toe spikes so that they will work with road or mountain shoes. Kevlar on the underside increases durability while the hook-and-loop closure makes the fit adjustable and the mounting quick. - AmFIB Softshell provides superior wind and water protection. - Innovative power-band secures front of shoe cover under toes. - Kevlar bottom with hook-and-loop closure allows easy on and off. - BioViz reflective elements for low-light visibility. - For road or mountain bike shoes.

Winter weather can be highly variable. Reach for our Thermal Neck Gaiter when you’re not sure exactly what Old Man Winter has in store. This versatile piece can be worn around the neck, face, or head, depending on your insulation needs. The thermal fabric insulates and is highly breathable, plus it’s made with recycled materials. FEATURES: - Pedal to Zero™: Going by bike 4mi / 7km offsets the climate impact of this garment - Highly versatile winter staple - Constructed from breathable thermal fabric - Made with recycled materials FABRIC: - 79% recycled polyester, 21% spandex

Shuttling to the top of your descent isn't always an option, and besides, sometimes it's nice to earn it. The Enduro Elbow Sleeves are lightweight and breathable for maximum comfort. They allow full range of motion thanks to a high-stretch rear panel. - Slip-on design - Perforated neoprene on the outside of the arm & stretch material on the back - Multi-fabric design fits perfectly, keeps you cool & dry and prevents slipping

Key Benefits: - Tough nylon faced neoprene upper - Offset rear zip with snap down puller and zip guard - Moulded rubber toe cap with treaded underside to help climb steep, muddy slopes - Asymmetric front seam for improved fit - Hard wearing reinforced sole protects the bottom of the overshoe from rocks and pedals - Crank rub protection - Reflective detailing - Suitable for MTB cleats only - 90 day Satisfaction Guarantee Design Philosophy Endura were among the first to employ neoprene in bike overshoes. A core stalwart of our collection, the MT500 Overshoe has been a best-seller for many years. Here in Scotland, we know a thing or two about foul weather gear and this latest evolution of our waterproof durable mountain bike overshoe is the result of years of testing in the worst possible conditions. Endura’s unique molded rubber toe cap with a treaded underside provides grip when climbing steep and muddy slopes. Improved Durability The stand out feature of Endura's MT500 Overshoe, and the one that sets it apart from the rest of the competition, is the molded rubber toe cap. This has been totally revamped with improved tread on the underside that gives you plenty of grip on steep, muddy slopes and also includes additional reinforced areas that improve the durability of the overshoe. Neoprene is the perfect material to construct overshoes from. Not only does it provide water and wind protection but it also adds an insulate layer over your foot. This keeps your circulation going allowing you to ride for longer in comfort, whatever the weather. 90 Day Satisfaction Guarantee So confident are we in this product that, if you are not entirely satisfied with it then we offer a no-quibble refund or replacement policy within 90 days of purchase.

Adiós, cold arms The Thermal Arm Warmers are perfect for cold rides, by trapping body heat and wicking moisture, you stay warm and dry during your wintery ride while a fleece brushed interior adds another level of comfort and is soft on skin. Product details - Thermal fabric traps body heat and wicks moisture, keeping you warm and dry - Fabric is breathable, moisture-wicking, and fast-drying - Anatomic left and right design - Soft brushed interior provides next to skin comfort - Wide gripper band with silicone print provides a stay-put fit - Fitted cut provides streamlined body fit for enhanced performance Specifications - Temperature use (high): 70 deg. F - Temperature use (low): 45 deg. F - Fiber content: 86% Nylon / 14% Spandex - Material: Knit

- Polylana is a warm and ultra-comfortable material - Made with 100% recycled polyester - Compared to acrylic, Polylana use 76% less energy, 85% less water, 19% less CO2, and produced 76% less waste

- Seamless stretch Microfiber multi-functional tube that can be worn as a neck gaiter, helmet liner, face mask, headband or in many other ways. - These were produced by Boulder, Colorado based Pandana. Features: - Natural Warmth and Wind Protection - Cooling Summer Wrap (simply wet with water for maximum Evaporative Cooling) - Lightweight and Packable - 100% Seamless Polyester Microfiber - Double Layer SPF 50+ - 25 x 50 cm (diameter x length)

Waterproof All Weather Cycle Oversock The original, 100% waterproof, ankle-length cycle oversock. Lightweight and streamlined, the Thetford is the ultimate oversock for cleated cycling footwear. Signature Aquasealz™ technology combines waterproofness with breathability, letting perspiration escape. Reflective detailing offers greater visibility at night. Polyester and nylon blend is soft and insulative, with a four-way stretch providing a close fit. The Thetford is the answer to non-waterproof cycling footwear, keeping feet aerated and dry. Outer – Nylon is extra durable and especially resistant to abrasion. Flexible and lightweight, nylon adapts to specific cycling cleats. Mid-Section – Aquasealz™ membrane is 100% waterproof and breathable, ensuring internal moisture does not build up in hat. Interior – Polyester and cotton lining is soft and warm, guaranteeing comfort wear after wear. Highly breathable and moisture-wicking. We want to inspire our community to stay outdoors longer. Thetford oversocks are fully waterproof, making cycling in wet conditions that little bit easier. Accessories are subject to rigorous testing before being put into production, guaranteeing the wearer complete protection against the elements. - Outer Layer - 93% Nylon, 7% Elastane - Middle Layer - Aquasealz® waterproof membrane - Inner Layer - 52% Polyester, 27% Cotton, 21% Elastane

This reflective yellow leg band with adjustable hook and loop closure secures loose pant legs to prevent chain catching. - Reliable hook and loop closure system works both wet and dry - Reflective yellow material for additional visibility - 1.25-inch width

Best-Selling Waterproof Neoprene Overshoe That Insulates And Protects Your Feet From The Rain And Cold—Universally Loved By Roadies Worldwide. Endura was the first to employ neoprene in bike overshoes. Not wanting to rest on our laurels, we have revamped our core road overshoe with several new features to keep it one step ahead of the competition. A core stalwart of our collection, the neoprene Road Overshoe has been a best-seller in our range for many years. Here in Scotland, we know a thing or two about wet weather gear and this waterproof durable overshoe is the result of years of testing in the worst possible conditions. Comfort was a key consideration when updating the Road Overshoe. To improve pedaling comfort, the decision was taken to off-set the rear zip, moving it away from the flex point behind your ankle reducing the chance of it digging in. Smooth neoprene outer face creates a surface that water naturally runs off, keeping your feet warm and dry inside. A durable sole with cleat access points stitched with a bulletproof aramid thread that extends the lifespan of our product beyond more flimsy alternatives on the market. - Smooth neoprene construction and welded asymmetric seam give super-smooth styling and waterproofing - Offset rear zip with snap-down puller and zip guard - Crank-rub protection print - Reflective rear zip tape - Hard-wearing stitching using aramid thread

Extend your cycling season Round out your cycling wardrobe with one of our most popular autumn road products. The S1 Softshell Shoe Cover keeps you warm, dry, and protected in rainy or dry conditions above freezing. Key features - Choose the right gear for your climate—S1 for above freezing, S2 for below - Profila Softshell fabric for water resistance and windproof protection in cold and wet conditions - Visibility colorway uses biomotion to help improve daytime detectability - YKK zipper for easy on/off - Designed for use with road or mountain shoes for maximum versatility - Reflective elements enhance visibility during nighttime riding

Warm feet are happy feet Extend your riding season with the S2 Softshell Shoe Cover. Designed specifically for insulation and weather protection over your regular footwear, this cover will keep your feet warm and dry in temps below 30°F/-1°C. Key features - Choose the right gear for your climate—S1 for above freezing, S2 for below - Profila Neoprene for insulation and protection in cold and wet conditions - YKK zipper for easy on/off - Designed for use with road or mountain shoes for maximum versatility - Reflective main materials enhance biomotion visibility for maximum safety - Fitted cut provides streamlined shoe fit even with dial and buckle closures Details - Fiber Content: 79% Rubber / 15.5% Nylon / 5.2% Polyester / 0.3 Polyethylene

Dry feet equal happy feet For the wettest days when it seems the precipitation is never going to let up, the Waterproof Shoe Cover has you covered and will keep your feet warm and dry. Thanks to a thermal fleece lined fabric that traps body heat and taped seams with a waterproof YKK zipper, water stays out and warmth stays in. Product details - Fleece lined Stormshell fabric is waterproof while trapping warmth - YKK waterproof zipper and taped seams for ultimate protection and reliability - Designed for use with road or mountain shoes for maximum versatility Specifications - Temperature use (high): 75 deg. F - Temperature use (low): 55 deg. F - Waterproof Rating: 10,000mm - Fiber content: 45% Nylon / 35% Polyurethane / 20% Polyester - Material: Woven - Sole Construction: Closed with holes for clips

Protect your little piggies With the Windshell Toe Cover, your feet retain an extra dose of warmth thanks to windshell material that is windproof and water-resistant no matter if riding on the road or mountains. - Windshell material provides insulation and protection during windy and wet riding - Integrated pull tabs for easy on and off - Designed for use with road or mountain shoes for maximum versatility - Soft elastic band above ankle for added coverage and comfort Specifications - Temperature use (high): 70 deg. F - Temperature use (low): 50 deg. F - Fiber content: 78% Rubber / 15% Nylon / 7% Polyester - Material: Woven - Sole Construction: Closed with holes for clips

Extreme Cold Mitts for Shimano/SRAM/Campy levers that have internally routed cables. Our XL size is specifically designed for Hydraulic Disc Brake Levers, customers with XL glove size, or you need to wear a heavier glove due to circulation issues. - Waterproof, 6mm thick neoprene with Fleece lining on the inside, and nylon lamination on the outside - Removable velcro cuff for easy access & removal of hands with no draw string complications - Neoprene has a closed cell construction that features closed air bubbles that serve as insulators - Allows one to use thinner gloves versus heavy gloves that get wet due to overheating - Thinner gloves provide better dexterity, so braking and shifting are easily accomplished - Those who suffer from Raynaud's or numb/cold hands can be comfortable and warm - Mitts are easily installed or removed for temperature changes - Zipper can be opened for ventilation for temperature regulation - Black, pair