Lighting

- Waterproof IPX7: Operates even after 30 minutes of submersion in a depth of 1 meter - 3x brighter than EL135 - OptiCube lens technology - Low battery indicator - Mode memory function - Two light modes (Constant / Flashing) - Replaceable bracket spacer - FlexTight bracket - Runtime : Constant: 30 hours (50 lumens) (Approx.) Flashing: 250 hours (50 lumens) - Battery type : 2 x AA alkaline battery - 5 ultra bright LEDs - Design offers high visibility - 3 modes: rapid, flashing, constant - Run time: R - 60h to 120h, F - 40h to 120h - 2x AAA batteries included - FlexTight bracket

Product details - Perfect for mounting compatible Flare taillights to rear rack - Includes a bolt and star washer for extra security - Easiest to install with light installed for better leverage

Flexible Versatite™ mount for Dash, Zot, Dart, Hotrod, Hotshot Micro 2W, Hotshot Pro 200 (flexible mount version; not for Hotshot Pro 200C) systems. Compatible with most handlebars, seat posts, and seat stays including aero styles.

Lezyne's Go-Pro LED Adapter allows you to mount your Lezyne LED light to any standard Go-Pro mount. This makes it fast and easy to switch swap out your camera and headlight using the same mount.

The NiteRider Tail Light Mount – Seatstay and Seatpost is our classic seatpost mount design that gives riders the option to mount their tail light to their seat stay, using the included seat stay clamp. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL

- Attaches to rear racks - Compatible with: Blinky 3,5,7 and Superflash - 25mm between each of the top horizontal holes (center to center) - Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack

Upgrade or refresh your bike.

Product details: - Fits all Flare tail lights - Works best with 27.2 - 31.6mm seatposts - Includes 16-degree offset for optimized use on seatposts

Mounting bracket for MSW front White Bat Headlight. - Includes 1 front mounting bracket

Replacement bracket for Pico and Tigermoth lights. - Includes 1 front bracket, 1 rear bracket, and 2 mounting straps

Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works. - Compatible with all PDW rear lights except the Asteroid and Fenderbot - Horizontal holes are 50mm apart to fit European rack standards - Vertical holes are 18mm apart to fit most reflector mounts

See and be seen with original equipment lighting accessories. - Works with any Bontrager Blendr compatible light - Includes hardware

Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr High Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light above your stem to see and be seen. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Bontrager Ion headlights - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)

Put a Flare almost anywhere - For use with all Flare tail lights - Perfect for attaching to a seat pack, belt, backpack, or anything with a loop - 2g

Quick mount headlight bracket - Fits 25.4 – 31.8mm handlebars

Original replacement light bracket for your Farley. Product details Hardware not included Requires two M5x0.8x10mm button head bolts

- Quick Charge USB-to-Micro-USB cable to charge your rechargeable Bontrager lights - Also able to charge most other Micro USB systems - 9 inches/23cm long

Cat Eye Mounts & Brackets can be added to multiple bikes, allowing any bike to be quickly adapted for nighttime rides. - Center-mount bracket uses the fender mount location at the fork crown - Keeps handlebars clear of clutter and lowers light to provide better contrast for the road surface - Compatible with AMPP1100 / 800, VOLT1700 / 1600 / 1200 / 800 / 700 / 400 / 300 / 200 / 100, Nano Shot+, Nano Shot, Econom Force, Econom, Uno, Jido, and HL-EL135

Mount your Cygolite bicycle headlight to a variety of GoPro compatible interfaces and third-party mounting options that are compatible with the GoPro interface. - Compatible with Ranger, Expilion, Metro, and Streak series - Includes adapter piece only

The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for our flagship tail light, the Sentinel. It allows you to fine-tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It's an easy on and off non-slip tail light mount that also features a grooved contact pad that makes this the 'go to' mount for riders using aero seat posts. System Compatibility - Sentinel - Solas - Sabre - CherryBomb

The NiteRider Tail Light Rack Mount gives you the option to mount your tail light directly onto your rack-ready/-equipped bike via this rack mount accessory. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL

The NiteRider Tail Light Strap Mount allows for quick installation and fitment on to standard seat posts. It features a quick release tab that allows you to remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL Not compatible with omega 300 and sentry aero 260 tail lights.

3 LED tail light The Blinky 3 is a classic cycling safety light. The iconic and durable kidney bean design has been keeping bikers visible for two decades. The 3 LEDs are super efficient and last for over 100 hours on flash mode.

The tool-free bracket allows for a wide variety of mounting options for MSW's TigerMoth headlight.

- Versatile LED and accessories forward mount - Bolts directly to stem faceplate - Included Aluminum Fork Mount, spacer and screw set - Suitable for most Lezyne most E-Bike front lights (Macro, Power, Power Pro, Micro, Hecto)

- Installs under the seat for a low profile, less cluttered appearance - Easy to install and stays secure in all terrain - Clamps to most two-rail bicycle saddles - Use with Cygolite Hypershot and Hotshot tail lights - Can also be used with GoPro compatible interface - Premium plastic for strong durability - Only weighs 23 grams - Less prone to scratching bikes compared to metal mounts - Tail light secures to mount without removing from saddle rails - Designed, engineered, and assembled in the USA

The versatile Composite Matrix Helmet Mount is a durable and versatile accessory for Lezyne KTV Pro, Power XL, Macro XL, Hecto XL and Micro XL Drives. It is constructed with lightweight and durable mold-injected Composite Matrix material for its base plate and spherical pivot. A strong rubber and Velcro strap attaches the mount to the helmet. The Composite Matrix spherical pivot and cradle allow the user to adjust the position of the light in all directions.

Product details - Easily integrate your Bontrager Flare tail light on your Madone 9 Series - Quick release designs matches perfectly on the Madone 9 proprietary seatpost clamp

The TL 6.0 will help keep you safe and seen from behind (210-degree visibility). The TL 6.0 operates on 2 AAA batteries (included) for up to 60 hours on flash. Features - Lumen Output: 25 - 4 Modes with a Run Time up to 60h - 2 x AAA Alkaline Battery Powered - Weight: 70g - Battery: 2 x AAA Alkaline - Increased safety with 210° of Visibility - Budget Friendly Rear Lighting System - 25 Lumen taillight with Eye Catching Flash Patterns - Water / Dust Resistant IP64 Rated Run Time - Up to 60h

Helmet mount kit compatible with Ranger, Expilion, Metro Pro and Plus, Metro, Streak, and Pace systems. - Includes: helmet bracket, velcro strap, and foam pad.